A weighed amount of sodium chloride is completely dissolved in a measured volume of 4.00 M ammonia solution at ice temperature, and carbon dioxide is bubbled in. Assume that sodium bicarbonate is formed until the limiting reagent is entirely used up. The solubility of sodium bicarbonate in water at ice temperature is 0.75 mol per liter. Also assume that all the sodium bicarbonate precipitated is collected and converted quantitativély to sodium carbonate The mass of sodium chloride in (g) is 17.02 The volume of ammonia solution in (mL) is 36.09 Calculate the following: How many grams of sodium carbonate will be produced from this precipitate??

A weighed amount of sodium chloride is completely dissolved in a measured volume of 4.00 M ammonia solution at ice temperature, and carbon dioxide is bubbled in. Assume that sodium bicarbonate is formed until the limiting reagent is entirely used up. The solubility of sodium bicarbonate in water at ice temperature is 0.75 mol per liter. Also assume that all the sodium bicarbonate precipitated is collected and converted quantitativély to sodium carbonate The mass of sodium chloride in (g) is 17.02 The volume of ammonia solution in (mL) is 36.09 Calculate the following: How many grams of sodium carbonate will be produced from this precipitate??

Chemistry: The Molecular Science

5th Edition

ISBN:9781285199047

Author:John W. Moore, Conrad L. Stanitski

Publisher:John W. Moore, Conrad L. Stanitski

Chapter13: The Chemistry Of Solutes And Solutions

Section: Chapter Questions

Problem 113QRT: A 0.250-M sodium sulfate solution is added to a 0.200-M barium nitrate solution and 0.700 g barium...

See similar textbooks

Similar questions

A 0.250-M sodium sulfate solution is added to a 0.200-M barium nitrate solution and 0.700 g barium sulfate precipitates. Write the balanced equation for this reaction. Calculate the minimum volume of barium nitrate solution that was used. Calculate the minimum volume of sodium sulfate needed to precipitate 0.700 g barium sulfate. Assume 100% yield.
a sodium chloride/ calcium chloride mixture was found to produce 0.16g of precipitate after dissolving in 60mL. A reference if 0.4h of calcium chloride in 60mL produced a precipitate with a percent yield of 73%. What would be the mass of calcium chloride in the mixture?
The aluminum in a 1.200-g sample of impure ammonium aluminum sulfate was precipitated with aqueous ammonia as the hydrous Al2O3.xH2O. The precipitate was filtered and ignited at to give anhydrous Al2O3, which weighed 0.2001 g. Express the result of this analysis in terms of %NH4Al(So4)2 %Al2O3 %Al
A 600.0 mg sample consist only of CaC2O4 and MgC2O4 was heated at 500°C converting the two salts to CaCO3 and MgCO3. The resulting precipitate weighed 465.0 mg. If the sample had been heated at 900°C, the products would be CaO and MgO, what would the mixture of oxides weigh? (FW: CaC2O4=128.1; MgC2O4=112.3; CaCO3=100.1; MgCO3=84.31; CaO=56.08; MgO=40.31)
There are several steps that are important in ensuring that the maximum amount of precipitate is obtained, that interferences are eliminated, and accurate measurements/results are obtained. Suggest two (2) of these steps and discuss how they could be done.
identify each sample by matching the respective solubility profile with the given structures. Give the Identity and Rationalization.
A solid sample contains unknown amounts of potassium and magnesium chloride and moisture. 1.193 g of the sample is dissolved in water and the solution is diluted to 250.00 mL. 25.0 mL of the sample is allowed to pass through an H + -saturated cation exchanger, the eluate consuming 22.03 mL of a 0.100 M NaOH solution. The moisture content of the sample was determined to be 5.22%. Calculate the % by weight of potassium and magnesium chloride in the sample.
What mass of silver nitrate will precipitate out of solution if 950.0g of silver nitrate is initially dissolved into 225 g of water at 50oC and then the solution is cooled to 20oC?
9. An aqueous solution of sulfuric acid is prepared by mixing a secondary standard of sulfuric acid with deionized water. The aforementioned acid is to be used as a titrant hence its concentration must be accurately determined. To do this, Engr. Polinar, standardized the titrant by titrating two liters of ammonia at 0.90 atm and 30 deg C. From the experiment, 134 mL of the titrant was necessary to neutralize the ammonia. Determine the concentration of the acid in terms of normality? 10. Engr. Forcadela is optimizing a plastic formulation by manipulating the phosgene concentration injected as a gas during the reaction. To obtain credible results, he considered the propensity of phosgene to dissociate into carbon monoxide and chlorine gas at 395 deg C. Performing an experiment at the aforementioned temperature, an equilibrium is reached amongst the species where the total pressure is at 3 atm. If the equilibrium constant expression in terms of concentration for the reaction at 395 deg C…
11. (ii) A student was given 400 cm of aqueous ammonia solution, NH,(ag), The student was asked to determine how many moles of NH, had been dissolved to prepare the solution. The student titrated 25.0cm of NH.(ag) and found that it reacted exactiy with 32.5cm3 of 0.100 mol dm sulturic acid. The equation for this reaction is shown below. 2NH,(aq) + H,SO,(aq) → (NH)SO,(aq) Calculate the amount, in moles, of NH, in the original 400 cm3 solution. mol answer =
The volume of water needed to dissolve 0.0624 grams of calcium chromate is L. Assume no volume change upon addition of the solid. The mass of nickel(II) hydroxide that is dissolved in 250 mL of a saturated solution is grams.