Solve it pls. A 60-ft-long "check dam" on a river provides a means ofcollecting debris that flows downstream. The flow over thedam is 6100 ft /s, and a model of this dam is to be built toa scale of 1/20. Assume that the water temperature for theprototype and the model is the same. The volumetric flowover the dam can be determined using =Part A- Cp/9LH2Determine the flow over the model.where Cp is the coefficient of discharge, q the accelerationof gravity, L is the length of the dam, and H is the height ofthe water above the crest Take Cp= 071 (Figure 1)ft* /sQm =SubmitPart BFigure1 of 1Determine the depth of water that flows over the crest of the model.60 tftSubmit

Answered: Image /qna-images/answer/4b0890f4-08b9-40fd-a6c6-a5f0a60a4873.jpg

A 60-ft-long "check dam" on a river provides a means of collecting debris that flows downstream. The flow over the dam is 6100 ft /s, and a model of this dam is to be built to a scale of 1/20. Assume that the water temperature for the prototype and the model is the same The volumetric flow over the dam can be determined using Q = CpvgLH$12 where Cn is the coefficient of discharge, q the acceleration of gravity, L is the length of the dam, and H is the height of the water above the crest Take Cp=071 (Figure 1)

A 60-ft-long "check dam" on a river provides a means of collecting debris that flows downstream. The flow over the dam is 6100 ft /s, and a model of this dam is to be built to a scale of 1/20. Assume that the water temperature for the prototype and the model is the same The volumetric flow over the dam can be determined using Q = CpvgLH$12 where Cn is the coefficient of discharge, q the acceleration of gravity, L is the length of the dam, and H is the height of the water above the crest Take Cp=071 (Figure 1)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The slope of the height h of a surface wave moving in a shallow pool of liquid is related to the speed of the wave u and gravity g by the following equation и ди дх g əx (a) Use a length scale L and a velocity scale Vo to 'nondimensionalize' the equation (b) What is the nondimensional parameter of the flow?
A prototype ocean platform piling is expected to encountercurrents of 150 cm/s and waves of 12-s period and 3-mheight. If a one-fifteenth-scale model is tested in a wavethe channel, what current speed, wave period, and wave heightshould be encountered by the model?
1. The deformation of the fluid will continue as long as the 2. When designing gates, vessels, dams or other bodies that are submerged in a liquid, it is important not only to estimate the - 3. The surface tension is the tensile force per -- in any direction along the surface the surface tension. 4. The value of - specifies whether the fluid can be assumed compressible or incompressible. 5. Archimedes' principle indicates- 6. A truck is filled with gasoline. If the container (tank) on the truck undergoes a - - is applied. - but also to specify its location on the body. then the liquid surface will begin to rotate clockwise about the center of the container and will eventually maintain a fixed tilted position.
Ex. The force required to tow a 1:30scale model of a motor boat in a lake at a speed of 2m/s is 0.5 N, Assuming that the viscosity resistance due to water and air is negligible in comparison with the wave resistance, calculate the corresponding speed of the prototype for dynamically similar conditions. What would be the force required to propel the prptype at that velocity in the same lake? Ans.: 10.95m/s, 13500N
"You are tasked to supervise the design of 0.5MW wind turbine to be constructed in the Wind Farm in Pililla, Rizal. Suppose the design criteria are as follows: The air density as surveyed after 2 year period averaged at 1.225 kg / cubic meter; the sweeping diameter of the rotor blades is 125m; and the anemometer reading in the area amounts to 4.2m/s on a 2 year period of survey. What is the theoretical power output of the turbine assuming 100% efficiency of operation? Your answer must be in kW and in two decimal places with correct signs." In the previous problem, if the diameter measurement is off by 0.1m and the anemometer reading is also fluctuating by 0.05m/s and if the error measurement for theoretical power output must be limited to 3%, WHY OR WHY NOT should you accept the design?
The laminar flow of a fluid with a constant viscosity, 4, inside a channel is governed by the following boundary value problem (strong form): d'u dp for y E (0, h) "dy dr u = 0 at y = 0 and y = h vhere u is the fluid velocity and is the pressure drop in the direction of the flow. a) Derive the weak form of the boundary value problem described above.
For studying of a dam in the laboratory, a model overflow has been built in the scale of , to 36 Prototype. The flowrate of the flow in the model is 0.15 . The required time for moving of water between two points in the model is 1 minute. Calculate: i. The volume flowrate in the prototype. ii. The required time for moving of water between the points in the prototype.
PROPAGATION OF ERROR You are tasked to supervise the design of 0.5MW wind turbine to be constructed in a Wind Farm in Pililla, Rizal. Suppose the design criteria are as follows: The air density as surveyed after 2 year period averaged at 1.225 kg / cubic meter. The sweeping diameter of the rotor blades is 125m, and the anemometer reading in the area amounts to 4.2m/s on a 2 year period of survey. if the diameter measurement is off by 0.1m and the anemometer reading is also fluctuating by 0.05m/s. In the design specifications given, if the actual measurement of power via the substation amounts to exactly 530kW and given that the windspeed is off by 0.05m/s, what could have been the error in the measurement of diameter? Your answer must be in 3 decimal places and in correct signs and measurement. Show complete solution in paper.
Figure shows the flow of water over a dam. Thevolume fl ow Q is known to depend only on crest width B ,acceleration of gravity g , and upstream water height Habove the dam crest. It is further known that Q is proportionalto B . What is the form of the only possible dimensionallyhomogeneous relation for this flow rate?
The Reynolds transport theorem (RTT) is discussed in Chap. 4 of your textbook. For the general case of a moving and/or deforming control volume, we write the RTT as follows: d pb dV + pbV-ñ dA dt dt dB sys where Vr is the relative velocity, i.e., the velocity of the fluid relative to the control surface. Write the primary dimensions of each additive term in the equation and verify that the equation is dimensionally homogeneous. Show all your work. (Hint: Since B can be any property of the flow-scalar, vector, or even tensor—it can have a variety of dimensions. So, just let the dimensions of B be those of B itself, {B}. Also, b is defined as B per unit mass.)
Here are these questions if I could get help with themIf a spherical storage tank holds 40,000 gallons (120,000 liters) of water,what diameter must it have?If a cylindrical storage tank has a 40-foot (12 m) diameter circular 05::=how high must it be to hold 1 million gallons (3 million liters)?If water is moving at a rate of 3.2 ft3/sec (90,000 cc/sec), how manygallons (liters) per minute is this?If the specific gravity of gold is 19.0. what is the weight of a cubic inch(cubic centimeter) of gold? A cubic foot (cubic meter)?
(b) A Formula 1 team tests their car in a wind tunnel at a scale of 50%, at a speed of Vwinarunnet = 50 m/s. The measured downforce at this speed is Foownforce.WT = 3000 N and the model reference area is Aref wT = 0.5 m?. 1. Find the downforce magnitude on the full-scale race car at the same Reynolds number. Assume constant air density p = 1.2 kg/m. II. It is said that F1 cars could travel upside down, as shown below. At what speed should the full-scale car travel to achieve this, if its mass is m = 740 kg? The acceleration of gravity is g = 9.81 m/s?. Downforce Weight