Please answer ASAP..thank youElectrical Machines A 460-V, 25-hp, 60-Hz, four pole, Y-connected induction motor has thefollowing impedances in ohms per phase referred to the stator circuit:R1 = 0.6410R2= 0.3320X = 1.1060X2 = 0.4640Хм — 26.30The total rotational losses are 1100 W and are assumed to be constant.The core loss is lumped in with the rotational losses. For a rotor slip of2.2 % at the rated voltage and rated frequency, find the motor'se) Tina and Tioadf) Efficiency A 460-V, 25-hp, 60-Hz, four pole, Y-connected induction motor has thefollowing impedances in ohms per phase referred to the stator circuit:R1 = 0.6410R20.3320%3DX = 1.1060X2= 0.464NХм — 26.30%3D%3DThe total rotational losses are 1100 W and are assumed to be constant.The core loss is lumped in with the rotational losses. For a rotor slip of2.2 % at the rated voltage and rated frequency, find the motor'sd) Pconv and Pout

Answered: Image /qna-images/answer/168bee71-b5b5-4b80-8242-9f7a4fdd496c.jpg

A 460-V, 25-hp, 60-Hz, four pole, Y-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.6410 R2 = 0.3320 %3D X2 = 0.4640 The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2.2 % at the rated voltage and rated frequency, find the motor's X1 1.106N XM = 26.30 %3D d) Pcony and Pout

A 460-V, 25-hp, 60-Hz, four pole, Y-connected induction motor has the following impedances in ohms per phase referred to the stator circuit: R1 = 0.6410 R2 = 0.3320 %3D X2 = 0.4640 The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2.2 % at the rated voltage and rated frequency, find the motor's X1 1.106N XM = 26.30 %3D d) Pcony and Pout

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter32: Three-phase Motors

Section: Chapter Questions

Problem 6RQ: Name three factors that determine the torque produced by an induction motor.

See similar textbooks

Similar questions

A three-phase induction motor operates at a slip of 3% and has a rotor copper loss of 300W. The rotational loss is 1500W. Determine (a) the airgap power and (b) the power output.
1.) A 6-pole, 3-phase, 60-Hz alternator has 12 slots per pole and four conductors per slot. The winding is 5/6 pitch. There are 0.025 Wb entering the armature from each north pole, and this flux is sinusoidally distributed along the air gap. The armature coils are all connected in series. The winding is wye-connected. Determine the open circuit emf per phase of the alternator. Subject Electrical machine 2
What are the similarities and dissimilarities of a 3-phase induction motor and a transformer?
1. Write down some advantages and disadvantages of different connections of three-phase transformers . (Write mainly for delta-delta, wye-wye, wye-delta and delta-wye)2. What is skew effect? Why is it important for the rotor of an induction motor?
1- The compole is used to 2- A 4-pole wave winding machine has ------ magnetic circuit. 3- A commutator pitch for the duplex wave winding is equal to - 4- A 2-pole triplex lap winding will have parallel paths. 5- A 6-pole lap wound generator has 900 conductors. The e.mf induced per one turn being 3V. the generated voltage of the grnerator is ( 6-A 10kW, 250 V shunt generator has armature and field resistance of 0.2 and 502 respectively. Then the generated voltage is and
Two 30 AC generators are such that one has twice the linear dimensions of the other. The field windings of each are excited to give identical sinusoidal air gap flux density waveform. Both have the same number of stator slots and identical winding patterns. The conductors per slot in big generator in K times that of the smaller one. The value of K to get equal no-load voltage at same frequency is (a)8 (b) 8 1 (d) 7 (c) 4
1. The operation of Commutator in DC Motor is * O a) to convert dc to ac O b) to convert ac to dc O c) to convert fixed dc to variable dc O reverse the current direction in the rotating windings each half turn
At rest condition, the slip of induction motor is 0. Select one: True False
A 25cps single-phase, 8-pole, alternator with 725 mWb flux per pole has 288 slots. The machine coil has 2 turns per coil. In the winding of the armature, the ratio between the chording angle to the fractional pitch is 1/8. Find the voltage between two terminals.
The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding having 263 series turns, a winding factor of 0.9, an air gap length of 0.6 mm, and a peak flux density of 1.6 T is,
T-a. The direction of rotation of a single-phase split-phase motor can be change by........ a) reversing the connection of the start winding b) reversing the connection of the run winding c) reversing the connection of the start and run winding at the same time d) "a" or "b", not "c" T-b. Single-phase split-phase motors using an electrolytic capacitor in the start winding circuit should not be cycled more than about__________ time per hour. a) 8 b) 12 c) 24 d) none of the above T-c. When replacing the capacitor in a capacitor-start induction-run motor, one must be sure to replace the bad capacitor with__________ . a) a smaller one b) one of the same size c) a larger one d) none of the above
ii)Conduct suitable tests to measure the copper loss occurs in a three phase Induction Motor.